Drew's 10-Inch Logger - Brown Rough Out
All boots we make are produced by craftsmen who have decades of shoemaking experience and in some cases third generation shoemakers. These boots are hand-lasted using old-world techniques and with the best components sourced across the world. Our upper leather is made with US hides that are 7.5-8oz thick, we use an industry first pre-molded leather insole. Our insole is full grain veg tanned leather, 5 – 5.5 millimeters thick and precisely molded to the bottom of the last. Each insole is individually molded to the exact size and width over a period of 48 hours. The molding process does not compress the insole or change its thickness, but significantly reduces the break in period and increases comfort out of the box. Break-in redefined (TM) Over time, the insole will mold to the foot and the natural imprint will enhance comfort even more while still providing arch support with minimal break in.
Our last: We took the 55 shoe last used in the PNW boot industry for decades and made it better! With boots on the ground and listening to our customers for years, we knew there was a better way. The natural progression of people have been getting bigger and wider feet - we added about an 1/8" to the outside of the last to allow more room in the toe box and eliminate that "pinkie rub." We also raised the instep slightly to allow an easier foot entry into the boot. With the fit alterations to the last and the pre-molded insole, these boots will be the best and easiest break-in of the industry.
Guts of the boot: We are using a veg tanned leather toe box (no plastic or celastic), leather heel counter, shank and heel base.
Details: One piece backstay / pull loop, scored midsole to place shank and nails precisely on each pair of boots, we use a high-pressure hydraulic press plus a press pad which is the exact negative of the Vibram 100 outsole to get an extreme bond to reduce squeaking and delamination.
- These are not true to size. Please size down 1/2 a size from your *seated* Brannock size. (Example: 10D seated Brannock = 9.5D logger)
- Or size down 1.5 sizes from your average shoe size. (Example: 10D sneaker = 8.5D logger)
- Thick 7.5-8oz USA leather from Seidel Tanning Corp
- Leather lined toe vamp
- Pre-Molded Leather insoles
- Leather Toe Box
- Leather Heel Counter
- Rebuildable/Resoleable
- Leather midsole, shank and heel base
- Vibram® 100 White X Lug Sole
- Solid Brass hardware
- Handmade in Leon, Mexico using the worlds best components
All boots we make are produced by craftsmen who have decades of shoemaking experience and in some cases third generation shoemakers. These boots are hand-lasted using old-world techniques and with the best components sourced across the world. Our upper leather is made with US hides that are 7.5-8oz thick, we use an industry first pre-molded leather insole. Our insole is full grain veg tanned leather, 5 – 5.5 millimeters thick and precisely molded to the bottom of the last. Each insole is individually molded to the exact size and width over a period of 48 hours. The molding process does not compress the insole or change its thickness, but significantly reduces the break in period and increases comfort out of the box. Break-in redefined (TM) Over time, the insole will mold to the foot and the natural imprint will enhance comfort even more while still providing arch support with minimal break in.
Our last: We took the 55 shoe last used in the PNW boot industry for decades and made it better! With boots on the ground and listening to our customers for years, we knew there was a better way. The natural progression of people have been getting bigger and wider feet - we added about an 1/8" to the outside of the last to allow more room in the toe box and eliminate that "pinkie rub." We also raised the instep slightly to allow an easier foot entry into the boot. With the fit alterations to the last and the pre-molded insole, these boots will be the best and easiest break-in of the industry.
Guts of the boot: We are using a veg tanned leather toe box (no plastic or celastic), leather heel counter, shank and heel base.
Details: One piece backstay / pull loop, scored midsole to place shank and nails precisely on each pair of boots, we use a high-pressure hydraulic press plus a press pad which is the exact negative of the Vibram 100 outsole to get an extreme bond to reduce squeaking and delamination.
- These are not true to size. Please size down 1/2 a size from your *seated* Brannock size. (Example: 10D seated Brannock = 9.5D logger)
- Or size down 1.5 sizes from your average shoe size. (Example: 10D sneaker = 8.5D logger)
- Thick 7.5-8oz USA leather from Seidel Tanning Corp
- Leather lined toe vamp
- Pre-Molded Leather insoles
- Leather Toe Box
- Leather Heel Counter
- Rebuildable/Resoleable
- Leather midsole, shank and heel base
- Vibram® 100 White X Lug Sole
- Solid Brass hardware
- Handmade in Leon, Mexico using the worlds best components
Our Promise of Satisfaction
Baker’s Boots is committed to making boots that inspire pride with every wear.
Easy Returns
Shop with confidence — our easy returns mean you’re always covered.
Durable Boots for the Hardworking American
We have been working 12-hour shifts since the early 1900’s, so we know what it takes to get the job done. For hardworking Americans everywhere, we offer boots that are as tough as you are.
Custom Boots for the exceptional individual
No two feet are identical—why should your boots conform to the mold of the masses? At Baker’s we provide completely personalized custom boots handcrafted right here in the U.S.